*When using the air cushion truck, connect the air compressor to the main air pipe and then connect the main air pipe to the air controller, and then use the auxiliary air pipe to connect the air cushion module to the air controller respectively.
*When connecting the trachea to the module, it must be ensured that the trachea is not knotted, not twisted, and no heavy objects can be placed on the trachea.
*Place several air cushion modules in a reasonable layout under the support of heavy objects to be transported.
*Connect the air source, turn each pressure regulating valve up, and turn each pressure regulating valve knob to raise the air cushion. "Note: The inflation pressure of each air cushion should not exceed 0.4Mpa." , Press the knob of each pressure regulating valve to lock it, then it can move. If the air supply pressure is too high, the air cushion will vibrate up and down.
*After the heavy object is moved and positioned, do not turn off the air source, but turn the anchor bolt of the heavy object to make it touch the ground. At this time, turn off the air source to deflate the airbag to withdraw the air cushion module.
*After the work is completed, the compressed air of the main air pipe and the auxiliary air pipe should be released first, and all the pressure gauges on the air regulator read zero.
