The hydraulic punching machine is composed of a manual pump or an electric pump and a working head. The oil hose is connected by a quick connector, which is reliable and fast. There is no directional restriction during operation. It is convenient to assemble and disassemble. Perforating metal plates such as iron, flat iron, copper, aluminum row, etc., is especially suitable for field work in electric power, construction and other industries.
It is suitable for punching operations of various steel, iron, copper, aluminum, formed steel, channel steel, I-beam, etc. It is small in size, light in weight, easy to operate, labor-saving and fast punching. The hydraulic punching machine is a kind of split hydraulic punching machine and integrated punching machine.
Operating specifications
1. Operators must be trained in safety technology, and only qualified personnel can take up the post.
2. The movable parts of the machine will exceed the range of the machine base and feet when moving. No one is allowed to enter the above dangerous area when the machine is started.
3. When the machine is working, the operator's hands cannot be placed near the die or on the moving platform. The height of the platform should not exceed 10 cm.
4. During the operation of the machine, no overhaul or adjustment of the mold is allowed.
Technical Parameters
a Separate hydraulic punching machine is suitable for punching L.H flat steel, copper and aluminum rows.
b The bottom is designed with a flat seat, which is stable and not easy to shake.
c Single-hole oil return. The mold is made of high-carbon tungsten alloy steel, which is not easy to break.
Instructions
a Connect the oil pump and the working head with a quick connector.
b Select the corresponding upper and lower molds, first install the upper mold and then the lower mold. When installing the upper mold, first unscrew the positioning screw out of a certain position and then install the lower mold. Be sure to put it in place, and then tighten the positioning screw to work. .
c Put the workpiece, close the oil pump oil return screw, move the handle until the work is completed, loosen the oil return screw, such as when punching thin metal plates, be sure to insert the return pad between the return tripod and the workpiece, otherwise The workpiece will get stuck on the mold.
