Hardware rigging use and maintenance knowledge

The most important thing to do with rigging is to ensure the safety of personnel. The environment in which rigging is used is generally relatively dangerous. Therefore, during the hoisting process, it is necessary to pay close attention to the work safety of personnel, remind the staff to establish safety awareness, take safety measures, and immediately withdraw from the dangerous scene when necessary. Proper storage rigging after use After the rigging has been completed, it must be recovered and properly stored. When storing, check whether the rigging is in good condition first, and recycle the damaged rigging instead of storing it. If it is no longer used in the short term, it must be stored in a dry and well-ventilated room, properly placed on the shelf, to avoid direct heat and sunlight, and away from chemical gases and articles. Keep the surface of rigging clean and do damage prevention work. When using the correct connection mode to select the rigging specification, the shape, size, weight and operation mode of the load object should be investigated and calculated first. At the same time, external environmental factors and possible conditions under extreme conditions should be added into the calculation method. When choosing the type of rigging, you should choose the rigging according to the way it is used. You should not only have enough ability to meet the use requirements, but also consider whether its length is appropriate. Rigging specifications and types should be checked before normal use according to the use environment. During hoisting, it should avoid twisting, twist the rigging and properly place the connection. Hoisting should be carried out according to the load the rigging can bear, and it should be kept on the upright part of the sling, away from the load and the hook, so as to prevent damage.