As an off-roader’s heart, the car’s electric winch is well-loved by off-roaders because it is not only small in appearance but also very easy to install. It is installed on the front bumper of an off-road vehicle and does not take up space in the car. Let’s explain about the car below. How is the electric winch installed?
1: First, you need to insert the remote control, and insert the remote control connection end into the winch.
2: After plugging it in, do not hang down the place where the remote control is connected, otherwise it will affect driving safety. The owner can choose the electric winch with wireless remote control.
3: Pull the noose, press the button of the remote control to place the hook position a little bit, and the length of the hook is suitable for hooking the position of the middle net.
4: Open the clutch, be sure to open the hook, and then open the clutch.
5: Hold the noose hook with your hand. When pulling the noose off the drum, hold the hook with one hand so that no matter how long the noose is pulled, the hook will not be out of reach
6: After pulling the noose to the fulcrum, lock the clutch. So far the winch is ready. Fixed fulcrum If you want to pull the car forward.
After completing the above 6 steps, the electric winch can be installed. It should be noted that after installation, the car must be tried to pull again to ensure that the electric winch is in a usable state to prevent it from being unusable.
