Before the electric pallet truck, you must check whether all parts are in good condition, check the performance of all operating elements and safety devices, check whether the brakes and batteries are fully charged, open the electric lock, move the steering rudder to its moving position, and slowly turn the accelerator. Move to the corresponding work area, turn the accelerator forward to drive the electric pallet forward, turn the accelerator backward to drive backwards, and turn the accelerator back to the middle position to stop. Start, stop or change movement should be slow, because sudden movement may cause Danger (due to inertia, especially when walking at high speed).
The mobile electric pallet truck can only use the current generated by the battery, and must not use rectified AC power to avoid damage to the electronic components. When the electric pallet truck is walking, the load should be in a low position, the fork height should not exceed 300mm, and the narrow passage or curved road should be slowed down .
