The mini electric hoist is a small lifting machinery equipment due to its small size and light weight.
Its motor is a pure copper wire motor with stable voltage and low power consumption. Compared with traditional electric hoists, it can be used at household voltage of 220V.
Its pure copper wire motor causes the miniature electric hoist to burn out every time it is working.
The following explains the common problems and solutions of micro electric hoists:
1. The motor of the mini electric hoist generates heat during use. This situation occurs mainly because the motor of the electric micro hoist uses a pure copper wire motor, which has stable voltage and low power consumption. This heating phenomenon is normal. Just take some time off.
2. During use, the wire rope winding becomes asymmetrical. In this case, we need to first check whether the hoist is in a fixed position or whether the cargo is tilted during lifting operations. If the above two situations occur, the balance can be adjusted in time. ;
3. The goods stop in mid-air and cannot be started again after braking. If this happens, first check whether the voltage is too low. If the voltage is too low, you need to wait for the voltage to return to normal before starting again.
Another possibility is that the motor is defective. phase, when a phase loss occurs, you need to check the number of power supply phases.
PA hoist has a specified rated life. If you take more care of it in daily life, the performance of the equipment will exceed the specified service life. However, if you tend to neglect the maintenance and operation of the equipment in daily life, then the equipment will have May cause premature aging.
So please follow the maintenance method
