How to use American turnbuckle bolts to lift large workpieces?

Large-scale workpieces are mostly complex in shape, large tonnage, and high in value, and their hoisting operations have a high risk factor. Therefore, the preparation work for hoisting large-scale workpieces with American TURNBUCKLE bolts is very important.

　　 First of all, fully analyze the shape characteristics of the workpiece, calculate and determine the position of its center of gravity, pay attention to the calculation cannot be estimated, and accurately calculate based on the drawing. Then, select appropriate American-style turnbuckle bolts, shackles, hooks and other related slings based on the calculation results. The selection of the wire rope is particularly important, and the tensile force carried by its single rope must be calculated.

　　Usually, there are hoisting lugs specially designed for hoisting on the workpiece. When working with American turnbuckle bolts, check the hoist rings first, and at the same time, reinforce the slings on all hoist rings. If the workpiece itself does not have lifting lugs, the correct lifting point must be calculated.

　　 American-style turnbuckle bolts act on the lifting of large workpieces. The preparations are done. After the test lifting is confirmed that there is no problem, the next step can be performed to effectively ensure the feasibility and safety of the operation.