The method of connecting wire rope chucks when used; the wire rope chucks are divided into a variety of industry standards and specifications according to different production specifications and standards. Common specifications are available from 3 to 40, and the common ones are fixed by the chuck fixing method. The most common fixing methods are horse riding, fisting, and pressing. Among them, the most widely used and most widely used is the riding style. Because it has the best working fastening effect, the fist type has no base that is not stable enough and the wire rope is easily damaged.
In the daily use of wire rope clamps, we must pay attention to the following situations. First, when selecting, the net distance of the U-shaped ring of the clamp product should be about 1 to 5 mm larger than the diameter of the wire rope. However, it should not be too large. After being too large, the connection card will not be tight, and accidents and accidents will easily occur. When fixing the wire rope clamp, be sure to tighten the bolts and nuts until the wire rope is flattened by about 1/3. When everything is ready to lift the wire rope, check again whether the wire rope clamp bolts and nuts are tightened to ensure the safe operation of the operation.
When arranging the wire rope chucks, they must be arranged in a certain order and direction. The U-shaped part should be in contact with the end of the wire rope and should not be in contact with the main rope of the wire rope. This is because in many safety production and related experience, it is summarized to avoid the main rope being crushed after being stressed. During the construction process, in order to check whether the wire rope joint is firmly sliding, you can splice a chuck at about half a meter from the last chuck and form a safe bend, so that no matter if the wire rope is sliding or accidental, All can be controlled through safety bends.
