1. First of all, we should start with the low-level height of the hydraulic pallet truck. The height of the pallet in the national standard is generally 185mm. The national standard manual hydraulic pallet truck manufacturers have also achieved the low-level height. Generally, the height of the hydraulic pallet truck is 85mm and 75mm when it is placed at the low point. The height of the fork of the manual hydraulic pallet truck can reach 51mm from the ground, which is a special requirement. The function of the low-level manual hydraulic pallet truck: low cost, relatively low cost, high efficiency, fast automatic lifting, easy to operate, etc. It is used more in supermarkets, workshops, airports, logistics warehouses, warehouses, etc. tool.
2. Secondly, check the width of the fork of the truck. The key judgment is to see the size of the pallet you use. Under normal circumstances, the standard size of manual hydraulic pallet trucks is divided into two types: one, wide truck 680*1220; second, narrow truck 550*1150, two types of trucks are suitable for each, depending on the size of the pallet currently used To decide.
3. The process of hydraulic vehicle cylinder again. At present, all manual forklift companies use two types of hydraulic cylinders, one is an integrated cast cylinder, and the other is a welded cylinder. Of course, both have their own advantages. But in terms of technology, the manufacturers are different, and the quality is likely to have a huge gap.
4. Wheel material configuration. Generally, the wheel material can be divided into polyurethane and nylon. This needs to be used according to the different selection of the site. The ground and mine are better, and the ground is relatively smooth can use polyurethane wheels to pull and save effort. If the ground is not very good, and it is concrete or asphalt, or even worse, use nylon wheels, which are light to pull, and second, they are flexible and wear-resistant. Besides, ordinary hydraulic vehicles are not made of the above two wheel materials. There are other configuration materials, such as polyurethane coated nylon, aluminum alloy coated plastic, bakelite wheels and so on.
5. Fork steel plate material thickness. Generally, a better standard 3.0-ton manual pallet truck uses a 4mm thick steel plate, while some of the poorer steel plate thickness plus paint thickness can’t reach 4mm, or only 3.5mm. Some even can only reach 3mm, which is the standard of a 2 ton manual pallet truck. Therefore, purchasers pay attention to this matter to prevent the price advantage of the manufacturer from cutting corners. This is also very irresponsible to consumers. Such a truck is also very prone to failure in subsequent use. And there will be problems in future after-sales service.
6. Deadweight tonnage. Generally speaking, the national standard manual pallet truck has four kinds of deadweight: 2.0t-2.5t-3.0t-5.0t. However, according to the segmentation of market demand, the manual hydraulic pallet trucks manufactured by some manufacturers also have six types of loading capacity: 1.5T, 2.0T, 2.5T, 3.0T, 4.0T, and 5.0T, which gives the market more choices. It also covers the operation requirements of low, medium and high tonnage. Customers can solve their own use problems according to their actual needs.
